Digital net for bi-directional control of connected devices. The acronym RDNet originates from the development, on behalf of RCF and dBTechnologies, of a universal network which allows adjustments in real time and supervision of all the connected systems, using cables based on ethernet cat 5 wires.

With the specific software and the interfaces control 2 and control 8, a complete command of the acoustic system will be possible allowing real time supervision on each electrical component of the various speakers.

RDNet allows you to : Monitor levels, limiters, and temperatures Select system presets Configure setups off-line Mute units Group modules and assigning group EQ, delay and phase Test individual components Automatically address system components Tap into LAN and USB interfaces Extend the network via wireless LAN access points.

A built-in measurement system can read the transducers impedance in real time and provide an instant feedback on the health of your system. This controls is performed constantly or it can be forced by the user at any time, remotely or from the amplifier panel.

Thanks to this universal data port, the user will be able to perform firmware upgrades. SWK KIT. TC VIOS1. VIO SF. North America. Dominican Republic. Bosnia and Herzegovina. Central Africa Republic. Congo Democratic Republic. Papua New Guinea. Solomon Islands. French Polynesia. United Arab Emirates.

Depending on the selected mode, the custom format parameters may include:. TIP: Select Load from Template to load the parameter values of a predefined output format. Select Load from Custom Format Bank to load the parameter values of an already created custom format.

Use Reset to reset all custom format parameters to their default edit mode value. PIXEL FREQUENCY TOO HIGH The custom format is invalid because its pixel frequency is too high PIXEL FREQUENCY TOO LOW The custom format is invalid because its pixel frequency is too low LINE FREQUENCY TOO HIGH The custom format is invalid because its line frequency is too high TOTAL PIXEL PER LINE IS TOO LOW The custom format is invalid because the number of pixels per line is too low.

NOTE: You will be asked to select a custom format bank slot to save your custom format: Available empty bank slots will appear in black Not available occupied bank slots will appear in blue.

Click on the OUTPUTS tab to access the outputs setup page. On the left side toolbar, select Custom Formats to access the custom formats page. In the SLOT window, select a custom format bank slot to contain your format.

TIP: Select an empty bank slot to create a new custom format. Select a non-empty bank slot to edit the custom format contained in the selected slot.

Select a Mode to edit the custom format parameters:. TIP: Click on the Load from predefined format button to load the parameter values of a predefined output format. Click on the Load from custom format button to load the parameter values of an already created custom format.

Use the Reset button to reset all custom format parameters to their default edit mode value. TIP: Click elsewhere or disable Edit mode to exit without saving.

Warning: The new custom format settings will not be saved if you exit without saving. Select the custom format to delete and press the ENTER key to confirm. Warning: This action is irreversible. SEE: Erasing custom formats. SEE: Setting up the format.

With virtual I/O slots, the library automatically moves cartridges from the I/O stations to the storage slots, enhancing import and export performance, while Product. 6U CompactPCI 8-slot SSR 33MHz VIO 5V BW Bit. 6U CompactPCI Backplane 8-slot, PICMG R, system slot right, supports full hot swap function The VIO service displays usage of VIO slots by job name or user ID. VIO AMTVI3I NO JOBS USING 45 OR MORE VIO SLOT(s). Copy. Was this

Video

Vio slot - autoscout.world › docs › autoscout.world › ipg__a69p0vio With virtual I/O slots, the library automatically moves cartridges from the I/O stations to the storage slots, enhancing import and export performance, while Product. 6U CompactPCI 8-slot SSR 33MHz VIO 5V BW Bit. 6U CompactPCI Backplane 8-slot, PICMG R, system slot right, supports full hot swap function The VIO service displays usage of VIO slots by job name or user ID. VIO AMTVI3I NO JOBS USING 45 OR MORE VIO SLOT(s). Copy. Was this

The acronym RDNet originates from the development, on behalf of RCF and dBTechnologies, of a universal network which allows adjustments in real time and supervision of all the connected systems, using cables based on ethernet cat 5 wires.

With the specific software and the interfaces control 2 and control 8, a complete command of the acoustic system will be possible allowing real time supervision on each electrical component of the various speakers.

RDNet allows you to : Monitor levels, limiters, and temperatures Select system presets Configure setups off-line Mute units Group modules and assigning group EQ, delay and phase Test individual components Automatically address system components Tap into LAN and USB interfaces Extend the network via wireless LAN access points.

A built-in measurement system can read the transducers impedance in real time and provide an instant feedback on the health of your system. This controls is performed constantly or it can be forced by the user at any time, remotely or from the amplifier panel. Thanks to this universal data port, the user will be able to perform firmware upgrades.

SWK KIT. TC VIOS1. VIO SF. North America. Dominican Republic. Bosnia and Herzegovina. Central Africa Republic. Skip auxiliary navigation Press Enter. Skip main navigation Press Enter. Toggle navigation.

Search Options. Mainframe Software. Community Home Threads Library Events Members. Back to discussions. Expand all Collapse all sort by most recent sort by thread. Page slot counting Jump to Best Answer.

Hello, As is stated in the HELP for the command: LOCAL page data set totals. Total Total LOCAL Hi, Info what have you send is clear but i still missing some explanation in the datail list Additionally, The LOCAL Used that is shown in the Info Area is the sum of the NONVIO and VIO slots Hello Martin, Investigating this further there is currently an open case with the same problem that Hi, cau you give me some link to opened case.

to see what is the result or solution to this issue Hello Martin, For the other open case, the customer opened a PMR with IBM ,, Page slot counting.

Martin Svidrnoch. Posted Apr 15, AM. Reply Reply Privately Options Dropdown. Custom formats. Expand All - Collapse All. What are custom formats? Enter the CUSTOMIZE menu on the Front Panel interface. Select CVT to set the width, height and rate of the format, and indicate whether the format has reduced blanking intervals or not.

The remaining custom format parameters will be computed by the system according to the CVT 1. Edit the custom format parameters in the selected edit mode. Depending on the selected mode, the custom format parameters may include:.

TIP: Select Load from Template to load the parameter values of a predefined output format. Select Load from Custom Format Bank to load the parameter values of an already created custom format.

Use Reset to reset all custom format parameters to their default edit mode value. PIXEL FREQUENCY TOO HIGH The custom format is invalid because its pixel frequency is too high PIXEL FREQUENCY TOO LOW The custom format is invalid because its pixel frequency is too low LINE FREQUENCY TOO HIGH The custom format is invalid because its line frequency is too high TOTAL PIXEL PER LINE IS TOO LOW The custom format is invalid because the number of pixels per line is too low.

NOTE: You will be asked to select a custom format bank slot to save your custom format: Available empty bank slots will appear in black Not available occupied bank slots will appear in blue.

Click on the OUTPUTS tab to access the outputs setup page.